greentelftth

The function of the Fiber Optic Splice Closure is to protect the optical fiber and optical fiber connector from impacts such as vibration, punching, bending, etc., and to prevent moisture. The splice box and the terminal box are different, and the fiber optic splice closure is fully sealed to be waterproof but it cannot fix the pigtail. The terminal box is not waterproof, the internal structure can be fixed on one side of the cable, one side can be fixed pigtails, in which the two ends of the optical fiber fusion, but the fiber optic splice closure is fiber optic cable and pigtail welding, the latter is the fusion between fiber optic cable.

Therefore, the fiber optic splice closure should have the following properties:

1. Good sealing. Optical fiber transmission attenuation has close relationship with waterproof performance, so the fiber optic splice closure should have good gas-tight and waterproof performance, general requirements within 20 years can effectively waterproof, moistureproof and prevent the harmful gas invasion.

2. Good mechanical performance. The fiber optic splice closure must have certain mechanical strength to ensure that the optical fiber performance will not be affected when the pressure applied on the optical fiber joint reaches 70% of its strength.

3. Long-term corrosion resistance. At present, most of the cases of fiber optic splice closures are made of plastic products. In addition to corrosion resistance, the materials’ aging resistance and insulation performance should meet the 20-year life requirements.

4. The fiber optic splice closure should be easy to disassemble and the material can be reused.

5. The fiber optic splice closure should be as light as possible to reduce the labor intensity and shorten the operation time.

The fiber optic splice closure is suitable for the direct connection and branch connection of overhead, pipeline, direct buried and other laying methods of various structural optical cable. The box body is made of imported reinforced plastic with high strength and corrosion resistance. The terminal is suitable for the connection in the terminal room of the structural optical cable.

https://www.greentelftth.com/ supplies a variety of quality Fiber Optic Splice Closure for different application.

Read more

About Inline Closure and Dome Fiber Closure:

Closure is categorized as Inline Clsoure or Dome Fiber Closure by the direction of cable entries.

Inline Closure has cable entries at both side and used for aerial or manhole (big enough to work inside).

Dome Fiber Closure has cabe entries at one side and is used for hand hole (small and unable to work inside).

In case of installation into hand hole, joint work is done at outside, then closure and the excess length of cables are stored into handhole.

When storing closure, Inline closure needs larger space than Dome Fiber Closure because it has cable at both sides.

Different between Dome Fiber Closure Description and Inline Closure Description

The Inland type closure is also called Horizontal closure. The input and output are on the both sides. Inline closure is more suitable for backbone application. GreenTel provides various shapes closure of Inland type. All the closures we offered are with a great sealing performance. High quality ABS material also ensures the durability whether the closure is in air, in pipeline or buried underground.

The DOME type closure is also called Vertical closure. The input and output ports are at the bottom of the closure. DOME closure is more suitable for the application on accessing layer. GreenTel provides various shapes closure of DOME type. All the closures we offered are with a great sealing performance. High quality plastic material also ensures the durability whether the closure is in air, in pipeline or buried underground.

Dome Fiber Closure’ Features VS Inline Closure’s Features

Features of Greentel Inline Closure

  • Easy to assemble
  • Protection level reaches IP68
  • High Quality plastic body material ensure the durability
  • Suitable for Φ5mm~Φ23mm cables
  • Aerial, underground, pipeline,man-holes,hand-holes assembling
  • Adapt to the ambient temperature from -40℃ to +65℃

Features of Greentel Dome Fiber Closure

  • Full mechanical seal
  • Protection level reaches IP68
  • High Quality Plastic body material ensure the durability
  • Suitable for Φ5mm~Φ38mm cables
  • Aerial, underground, pipeline,man-holes,hand-holes assembling
  • Adapt to the ambient temperature from -40℃ to +65℃

Among those famous Inline closure manufacturers and suppliers, Green Telecom Tech Co.,Ltd can offer you customized horizontal fiber optical splice closure, inline closure, Inline fiber. Greentelftth.com waiting for your contact.

Click fiber closure manufacturer: https://www.greentelftth.co/ for further information.

Read more

Ftth Box lighting can be a mesmerizing lighting to your room. It can add a new mood to your room and make your room become an excellent place for your family. This light is commonly used in theaters to illuminate the dark when it is needed. In home use, it is usually used to light up the ceiling’s inner part to provide glow. In a dinner party, it is usually placed on a table to add ambiance.

With an artistic table, this lamp will be a good additional accessories and lighting to your home. Here are some ways which you can do to make the table for your fiber optic lamp.

The first thing you have to do is to prepare for the plywood. Cut it horizontally into 6 feet and vertically into 4 feet. It will be an ideal size for your diner table with fiber optic lamp.

Make a cutout in the middle of the plywood by using a jigsaw with the measurement of 5 feet in horizontally and 1 foot in vertically.

Then, slash two pieces of plywood with the measurement of 4 feet high by 5 feet wide. Then, slash two pieces into 4 inches high by 1 foot wide. Then, fasten those four pieces together using nails or screw. Drill some 1 inch hole on the 1 foot wide wood. It will be the way for the fiber to go through. Then, connect the box precisely under the opening. Use your nails or screw to fasten it. It will display your fiber optic lights later.

The next thing you have to do is to polish the table and paint it. In order to make the light illuminated by the lighting pop up in the dark, go for the dark color. As the options, you can consider black or dark brown. Some other alternatives are dark green, dark purple or dark blue.

Keep the illuminator under the table securely by using screw and steel strap. Hook the illuminator up to the power source which is close to the table. Instead of electricity power, you can go for the illuminator with battery-powered.

Then, put the table on the top of the two PV columns with 4 feet high each. Paint those columns with the same color as your tabletop. Hold them to the place using nails and screws. Place the fit-sized glass on the table top. After making sure that everything’s ready, the last thing you have to do is to test the illuminator by turning it on. After the paint is dry, insert one fiber optic box ribbon into each 1-inch holes you have made before. You can use some different colors to make it look interesting. Attach them securely on the wood. Then, connect each ribbon end to the illuminator.

Read more